類型：

熱電偶雙金屬溫度計

產品特性
● 測量壓力可達4KPa
● 根據不同測量介質的防腐要求
可選擇多種不同 的膜片
● 儀表可制做成充液耐震型
應用于工作環境有震動的場所
 
Features
● Minimum pressure is down to 4 KPa
● According to different corrosion-proof reguests,
many types can be selected.
● Liquid filling model can be supplied, applied in the
vibration enrironment.
　
產品簡介
BX/BXN系列膜片電接點壓力表采用膜片作為測壓敏感元件，并可根據不同的測量介質選用不同材料的膜片。本儀表主要用于工業過程中對氣體、液體壓力微小壓力的測量，尤其適用于腐蝕性粘稠介質（非凝固、非結晶）的微小壓力測量，并通過儀表指針的觸點與設定指針的觸點相接通（斷開）控制系統中電路的開關，以達到自動控制和自動報警功能。
 
PRODUCT  OVERVIEW
BX/BXN Diaphragm electric contacts pressure gauge adopts diaphragm as sensitive
element, and it could choose different materials baed on different measure mediums. The
pressure gauge mainly applys to measure the micropressure of gas, liquid in industry
course, especially fits to medium of corrosion and viscidity (non-solidification & non-crystal).The pointer of instrument will make contacts turn on or cut with the contacts of set fingr,causing the cut and turn-on of control system for the purpose of automatic control and alarm.
 
主要技術參數
儀表類型     普通型、耐震型（充油）
指示儀表直徑 φ100mm、φ160mm
指示     φ100mm:±1.5%;(±1.6%;)±2.5%   φ160mm:±1.5%;（±1.6%）
設定     ± 4% ；
接點數量     1個或 2個；
接點材質     ≥ 110V銀鎳合金，≤ 36V黃金
接點控制方法 見附表
測量范圍     正壓 0-4kPa至 0~2.5MPa ；負壓 -4-0kPa至 -100-0kPa及任何相關正負壓聯程；
工作壓力     靜負荷用至測量上限值的 3/4；交變負荷用至測量上限值的 2/3；
短時壓力用至上限值
膜片材料     3J1、SUS304、SUS316、SUS316L、噴涂 PTFE
接體材料     SUS304、SUS316、（SUS316L）；
外殼材料     SUS304；
儀表玻璃     有機玻璃、安全型雙層玻璃；
外殼防護等級 普通型：IP54 ，耐震型：IP65；
工作電壓 380V•AC或 220V•DC；
電流     1A；
觸點功率     30VA；
環境溫度     普通型：-40～+70℃；耐震型：-20～+60℃；
耐震型填充液 儀表專用填充液；
連接尺寸     螺紋連接 M20 × 1.5、或約定的特殊要求；法蘭連接（按相關標準或約定的特殊要求）。
 
Main technic index
Type: Standard type,vibration-proof type(oil filled)
Diameter: φ 100mm, φ 160mm
Accuracy: φ 100mm, ± 1.5%; (± 1.6%;)± 2.5%  φ 160mm, ± 1.5%, (± 1.6%)
Set accuracy: ± 4%;
Contact points: 1 or 2; ≥ 110V銀鎳合金，≤ 36V黃金
Contacts control: See attached table
Range: Plus pressure 0-4kpa to 0~2.5MPa Minus pressure -4-0kpa to -100-0kpa and other compound ranges
Working pressure: Steady: 3/4 of full scale value
Fluctuating: 2/3 of full scale value
Short time: full scale value
Diaphragm material: 3J1, SUS304, SUS316, SUS316L,PTFE coated
Connection body: SUS304, SUS316 (SUS316L)
Case material: SUS304
Windows: Organic glass, Safety glass (double deck)
Case protection: Class standard type: IP54 　　　　　　　 Vibration-proof: IP65
Maximum working voltage: 380V.AC or 220 V.AC
Maximum current: 1A
Contact power: 30VA
Environment temperature: Standard type: -40-+70℃ Vibration-proof type: -20-+60℃
Liquid filling for vibration-proof type oil:Filling liquid for special instrument
Connection: Thread connection M20×1.5, or special requirement Flanged connection (by relative standards
or promised special requirement)
 
儀表外形尺寸 DIMENSIONS
標準型 Standard style BX(YPXC)
耐震型 Vibration-proof style BXN(YPXCN)
 
 
 
公稱尺寸Dimensions
mm 測量范圍Range
kPa d
mm B
mm D1
mm D2
mm G H
mm SW
mm
100 ≤25 160 88 101 99 M20×1.5
或其它規格
Or other
specification 135 
27
160   90 161 159  165 
100 ≥40 100 88 101 99  135 
160   90 161 159  165 
 
附表：電接點開關控制方法 Attached list: switch control method of electric contacts
接點代碼
Code of
contacts  接點功能
識別編號
Code title  接點數量
Quantity  指針順時針旋轉開關功能
Switch fuction of deasil rotating pointer  示意圖
Sketchmap  線路圖
Ciranit
diagram
單上限
one upper
limits 821.1    超過設定點時，接點接通電路，（常開接點）
over the setpoint,circuit is turned on (N.O.)
    
單下限
one lower
 limits 821.2 1  超過設定點時，接點斷開電路，（常閉接點）
over the setpoint,circuit is cut (N.C.) 

 
單刀雙擲
SPDT  821.3
    SPDT:超過設定點時，接點轉換，一個接點接通電路，
SPDT:另一個接點斷開電路
SPDT: Over the sepoint, contacts transferred, one
turned on and the other one cut   
雙上限
two lower
limits 821.11   超過設定點時，接點1 和接點2 都接通電路
over the setpoint,circuit is turned by contact 1 and 2
1 and 2   
雙下限
Two lower
 limits 821.22   超過設定點時，接點1 和接點2 都斷開電路
over the setpoint,circuit is cut by co ntact 1 and 2   
常開上下限
N.O.upper and
lower limits 821.21 2 超過設定時，接點2 斷開電路接點1 接通電路
over the setpoint,circuit is cut by contuct 2，
turned on by contuct 1   
常閉上下限
N.C.upper and
lower limits 821.12   超過設定時，接點2 接通電路接點1 斷開電路
over the setpoint,circuit is tumed on by contact 2，
cut by contact 1   
單刀雙擲
SPDT 821.33   兩組SPDT 接點，功能同821.3
Two groups of SPDT, with same function as 821.3   
 
說明：1、定貨時請按表中規定的開關功能給出相應的接點名稱或編號。
2、表中雙接點連接導線為：接點2 為下限設定點，接點1 為上限；設定點，接點3 為公共端。
3、表中描述的開關功能是表示：儀表壓力指針位于小刻度值時所具有的開關功能，即壓力指針從小刻度值開始順時針動時的開關狀態，當壓力指針逆時針轉動時，實現的開關功能相反。
1. When ordering, please specify the name or No. of contacts referring to the table.
2. Leads of single or double contacts: lower limits is contact 2, upper limits setpoint is contact 1, contact 3 is public port.
3. Turn on and cut function details: The table shows the turn on and cut situations as pointer moves deasil, and the function is opposite while the pointer moves widdershins.